ShoeGeometry

Brooks Cascadia 20 vs KIPRUN Kipsummit Max

Last updated 2026-10-28 · the comparison recomputes itself when either shoe’s data changes

Two shoes compared on measured geometry. Each cell carries a provenance badge; open a shoe for sources.

heel boneBrooks Cascadia 20: heel 39 mm, forefoot 33 mm (drop 6 mm); toe rocker 36 % of length, radius 44 % of length; heel bevel 8 % of length, 12 mm high at the back, ending behind the heel bone (only the back edge is rounded).Brooks Cascadia 20: toe rocker 36 % of lengthKIPRUN Kipsummit Max: heel 39 mm, forefoot 33 mm (drop 6 mm); toe rocker 39 % of length, radius 51 % of length; heel bevel 16 % of length, 27 mm high at the back, reaching in front of the heel bone (the sole still curves up under it: a heel rocker).KIPRUN Kipsummit Max: toe rocker 39 % of length
  • Brooks Cascadia 2039/33 mm · toe rocker 36 % · heel bevel 8 %
  • KIPRUN Kipsummit Max39/33 mm · toe rocker 39 % · heel bevel 16 %
Illustrative profiles, not photographs: drawn from published stack heights and photo estimates of the unloaded shoes on a common length (300 mm), heels aligned, toe to the left; dots mark where each toe rocker starts; the dotted vertical line is under the heel bone (12 % of length), so a heel curve reaching past it is a bevel in front of the heel bone. Dotted lines use typical values where a shoe has no measurement. Exact values are in the table below.

Which suits you

If you wantPickBecause
A smoother roll at toe-offKIPRUN Kipsummit Max36.4 vs 39.5 % toe rocker
More cushioning under the heelAbout the same39 vs 38.5 mm heel stack
More under the forefootAbout the same33 vs 32.5 mm forefoot stack
A lower dropAbout the same6 vs 6 mm drop
A stiffer, snappier forefootBrooks Cascadia 2053 vs 31 /100 stiffness
A firmer, more stable feelKIPRUN Kipsummit Max74 vs 90 /100 firmness
A wider base under the forefootAbout the same117.7 vs 117.6 mm forefoot base

From the values below, with differences inside measurement noise shown as about the same. This describes the shoes, not what is right for your feet; comfort in the first few runs decides.

MetricBrooks Cascadia 20
Trail · Trail
KIPRUN Kipsummit Max
Trail · Trail
Heel-to-toe drop6 mmDerived6 mmStated
Heel-to-toe drop (lab)8.8 mmMeasured8.1 mmMeasured
Heel stack39 mmStated38.5 mmStated
Heel stack (lab)37.9 mmMeasured35.5 mmMeasured
Forefoot stack33 mmStated32.5 mmStated
Forefoot stack (lab)29.1 mmMeasured27.4 mmMeasured
Weight306 gStated266 gStated
Toe rocker36 %est.39 %*est.
Rocker radius44 %est.51 %est.
Rocker rise angle28 degest.24 deg*est.
Rocker angle at toe60 degest.55 degest.
Toe tip over ground44 mmest.39 mmest.
Visible rocker lift onset76.3 %est.70.7 %est.
Toe spring (relative)19.4 %est.17.8 %est.
Heel bevel length7.7 %*est.16.5 %*est.
Heel bevel height12 mmest.27 mm*est.
Midsole width (forefoot)117.7 mmMeasured117.6 mmMeasured
Midsole width (heel)98.5 mmMeasured96.6 mmMeasured
Interior forefoot width93.7 mmMeasured93.3 mmMeasured
Toebox width70.6 mmMeasured69 mmMeasured
Longitudinal stiffness53Derived31Derived
Midsole firmness74Derived90Derived
PlateRock plateNo plate
Primary foamDNA Flash v2FASTECH+ (supercritical A-TPU)
List price$160$150

Key differences

  • Heel-to-toe drop is about the same: 6 mm for Brooks Cascadia 20, 6 mm for KIPRUN Kipsummit Max.
  • Heel stack is about the same: 39 mm for Brooks Cascadia 20, 38.5 mm for KIPRUN Kipsummit Max.
  • Forefoot stack is about the same: 33 mm for Brooks Cascadia 20, 32.5 mm for KIPRUN Kipsummit Max.
  • Brooks Cascadia 20's weight is 306 g, 40 g heavier than KIPRUN Kipsummit Max's 266 g.
  • Brooks Cascadia 20's toe rocker is 36 % of length, 3 % of length shorter than KIPRUN Kipsummit Max's 39 % of length.

More comparisons

Read more about both shoes

We measure the shape. For how they feel over many miles, and for lab tests of cushioning, grip and fit:

Brooks Cascadia 20

KIPRUN Kipsummit Max

Independent sites; we are not affiliated with them.

Share or embed

Brooks Cascadia 20 vs KIPRUN Kipsummit Max: side profile drawing and key numbers
Download image

Embed on your site, blog or forum

Image with a link back:

<a href="https://shoegeometry.com/compare/brooks-cascadia-20-vs-kiprun-kipsummit-max"><img src="https://shoegeometry.com/compare/brooks-cascadia-20-vs-kiprun-kipsummit-max/share.png" alt="Brooks Cascadia 20 vs KIPRUN Kipsummit Max: running-shoe geometry (ShoeGeometry)" width="600" height="315" style="max-width:100%;height:auto"></a>

Live embed (updates when we measure more):

<iframe src="https://shoegeometry.com/embed/compare/brooks-cascadia-20-vs-kiprun-kipsummit-max" title="Brooks Cascadia 20 vs KIPRUN Kipsummit Max (ShoeGeometry)" width="100%" height="580" style="border:0;max-width:640px" loading="lazy"></iframe> <p><a href="https://shoegeometry.com/compare/brooks-cascadia-20-vs-kiprun-kipsummit-max">Brooks Cascadia 20 vs KIPRUN Kipsummit Max</a>: running-shoe geometry from ShoeGeometry</p>

Free to use with the link back (CC BY 4.0). Lab measurements are credited to the lab that made them.