ShoeGeometry

Saucony Endorphin Pro 5

RacingRoadCarbon plate2026Men'sCurrent

Last updated 2026-10-28 · methods as of 2026-10-08 · change history · why sources disagree

Saucony's carbon-plated marathon racer with dual-layer PWRRUN HG and PWRRUN PB foam and an 8 mm drop.

Catalogue average: heel 38 mm, forefoot 31 mm, toe rocker 35 %Saucony Endorphin Pro 5: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 35 % of length, radius 40 % of length; heel bevel 13 % of length, 31 mm high at the back, ending about under the heel bone.40 mm32 mmUnder the centre of the heel bone: 12 % of length from the heel, where heel stack is measuredheel boneHeel contact: the sole is within 4.5 mm of the ground from 13 % of length (foam compresses more under load), ending about under the heel boneheel bevel 13 %Toe rocker: the front 35 % of the length curves up (the curve leaves the ground 65 % of length from the heel)toe rocker 35 %toeheel
Front: toe rocker shorter longerRear: heel stack lower higher not measured
Dashed: average of the catalogue
Illustrative profile, not a photograph or scan: drawn to scale for a 300 mm shoe from published stack heights and photo estimates of the unloaded shoe (under body weight the foam compresses and the curves flatten). The grey upper is a generic outline, not this shoe’s. Saucony Endorphin Pro 5: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 35 % of length, radius 40 % of length; heel bevel 13 % of length, 31 mm high at the back, ending about under the heel bone. Heel bone: 12 % of length from the heel, where heel stack is measured. Heel bevel and toe rocker are marked where each curve meets the ground; for the heel that is where the sole comes within 4.5 mm of the ground, which foam compression closes under body weight.

Estimated by ShoeGeometry from photos

AI estimated
Toe rocker
35%median of 6 photos
Toe tip over ground
45mm*median of 6 photos, approx., for a men’s US 9
Heel bevel length
13.1%from 6 photos, rough estimate
Rocker radius
40 %from 6 photos
Rocker rise angle
30 degmedian of 6 photos
Rocker angle at toe
62 degfrom 6 photos
Visible rocker lift onset
76.2 %from 6 photos
Toe spring (relative)
20.6 %median of 6 photos
Heel bevel height
31 mmmedian of 6 photos, approx., for a men’s US 9
Toe box shape
74 %from 5 photos

* Uncertain: the photos disagree more than usual.

ShoeGeometry’s own software estimates these from public side-profile photos of the shoe (the toe box from top and sole views), not from brand or lab figures; each combines several photos, the toe measures and heel height as their median (how). We compared them with one independent lab’s rocker measurements of about 110 shoes (how close they come).

At a glance

Figures from brands, labs and retailers, each credited below.

Heel-to-toe drop
8mmStated
Stack, heel / forefoot
39.5 / 31.5mmStated
Weight
232gStatedUS M10.5
Stiffness / firmness
96 / 49of 100Derived
Plate
Carbon plate
Primary foam
PWRRUN HG + PWRRUN PB

How it compares

  • Saucony Endorphin Pro 5's heel-to-toe drop is 8 mm, higher than the catalogue median of 6 mm (62% of the 209 other current shoes are lower).
  • Saucony Endorphin Pro 5's heel stack is 39.5 mm, thicker than the catalogue median of 38 mm (63% of the 208 other current shoes are thinner).
  • Saucony Endorphin Pro 5's forefoot stack is 31.5 mm, about the catalogue median of 31 mm (53% of the 206 other current shoes are thinner).
  • Saucony Endorphin Pro 5's weight is 232 g, lighter than the catalogue median of 268 g (19% of the 197 other current shoes are lighter).
  • Against the Saucony Endorphin Pro 4: weight lighter (details).
  • 4 shoes with similar geometry from other lines.

Differences smaller than the precision of the sources (about 1 mm of stack, 8 g, or the spread between photos for photo estimates) are reported as about the same.

Specifications

Heel-to-toe drop
Manufacturer stated
8mm
HighSpec listingbrand figure, reported by Believe in the Runsource
Heel stack
Manufacturer stated
39.5mm
HighSpec listingbrand figure, reported by Believe in the Runsource
Forefoot stack
Manufacturer stated
31.5mm
HighSpec listingbrand figure, reported by Believe in the Runsource
Weight
Manufacturer stated
232g
HighChecked by handbrand figure, reported by Believe in the RunUS M10.5source

Measured in a lab (RunRepeat): heel 36.5 mm · forefoot 27.8 mm · drop 8.7 mm, taken at the points World Athletics uses (12 % and 75 % of the length), the same on every shoe. The figures above are the brand’s where it states them; labs and brands often measure at different points (why sources disagree).

Plate
Carbon plateSlotted carbon fibre plate
Primary foam
PWRRUN HG + PWRRUN PB
List price
$240

Plate, foam and price from Men's Endorphin Pro 5 Plated Race Day Running Shoes by Saucony.

Geometry

Percent values are relative to shoe length so they compare across images and sizes; widths in millimetres are lab measurements from the cited source, while toe tip and heel heights in millimetres are photo estimates converted for a men’s US 9 (assumed 300 mm long), so approximate. See how rocker geometry is defined.

Toe rocker
AI estimated
35%

Median of 6 photos.

LowSide photosource
Rocker radius
AI estimated
40%

From 6 photos: one of the two that agree most closely.

LowSide photosource
Rocker rise angle
AI estimated
30deg

Median of 6 photos.

LowSide photosource
Toe tip over ground
AI estimated
45mm*

Median of 6 photos. * Uncertain: the photos disagree more than usual.

LowSide photosource
Rocker angle at toe
AI estimated
62deg

From 6 photos: one of the two that agree most closely.

LowSide photosource
Visible rocker lift onset
AI estimated
76.2%

From 6 photos: one of the two that agree most closely.

LowSide photosource
Toe spring (relative)
AI estimated
20.6%

Median of 6 photos.

LowSide photosource
Heel bevel length
AI estimated
13.1%

From 6 photos: the average of the two that agree most closely.

MediumSide photosource
Heel bevel height
AI estimated
31mm

Median of 6 photos.

MediumSide photosource
Midsole width (forefoot)
Externally measured
120.1mm
MediumLab testsource
Midsole width (heel)
Externally measured
91.2mm
MediumLab testsource
Toe box shape
AI estimated
74%

From 5 photos: the average of the two that agree most closely.

LowTop photosource
Interior forefoot width
Externally measured
95.2mm
MediumLab testsource
Toebox width
Externally measured
69.3mm
MediumLab testsource

Stiffness

Longitudinal stiffness
Derived
96/ 100

Lab reading: 26.1 N, force to bend the shoe 30° (lab bending test); the score is our 0–100 rescaling of it.

MediumLab flex testsource
Midsole firmness
Derived
49/ 100

Lab reading: 33.3 Asker C, midsole durometer reading (higher = firmer); the score is our 0–100 rescaling of it.

MediumLab durometersource

How it compares

Appears in:Carbon plateWide platform

On the shortlist in these guides:Forefoot pain

Compare:Saucony Endorphin Pro 5 vs Saucony Endorphin Pro 4Saucony Endorphin Pro 5 vs New Balance FuelCell SuperComp Elite v6Saucony Endorphin Pro 5 vs Nike Alphafly 4Previous version: Saucony Endorphin Pro 4

What changed from the Saucony Endorphin Pro 4

Weight lighter. Compared with the previous version in this catalogue; differences within measurement noise are shown as about the same.

heel boneSaucony Endorphin Pro 5: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 35 % of length, radius 40 % of length; heel bevel 13 % of length, 31 mm high at the back, ending about under the heel bone.Saucony Endorphin Pro 5: toe rocker 35 % of lengthSaucony Endorphin Pro 4: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 36 % of length, radius 41 % of length; heel bevel 12 % of length, 28 mm high at the back, ending about under the heel bone.Saucony Endorphin Pro 4: toe rocker 36 % of length
  • Saucony Endorphin Pro 540/32 mm · toe rocker 35 % · heel bevel 13 %
  • Saucony Endorphin Pro 440/32 mm · toe rocker 36 % · heel bevel 12 %
Illustrative profiles, not photographs: drawn from published stack heights and photo estimates of the unloaded shoes on a common length (300 mm), heels aligned, toe to the left; dots mark where each toe rocker starts; the dotted vertical line is under the heel bone (12 % of length), so a heel curve reaching past it is a bevel in front of the heel bone. Dotted lines use typical values where a shoe has no measurement. Exact values are in the table below.
MeasureSaucony Endorphin Pro 4Saucony Endorphin Pro 5Change
Heel stack40 mm39.5 mmabout the same
Forefoot stack32 mm31.5 mmabout the same
Drop8 mm8 mmabout the same
Weight241 g232 glighter (−9 g)
Toe rocker35.7% of length34.6% of lengthabout the same
Toe tip over ground45.2 mm45.3 mmabout the same
Rocker rise angle30°30.1°about the same
Stiffness93/10096/100about the same
Firmness56/10049/100about the same
Forefoot base width118.9 mm120.1 mmabout the same

Full side-by-side comparison →

Wrong value? Missing data? Tell me
Stored only to improve the site; see privacy.

Read more about this shoe

We measure the shape. For how the Saucony Endorphin Pro 5 feels over many miles, and for lab tests of cushioning, grip and fit, read these:

Independent sites; we are not affiliated with them. Found automatically each week.

Share or embed

Saucony Endorphin Pro 5: side profile drawing and key numbers
Download image

Embed on your site, blog or forum

Image with a link back:

<a href="https://shoegeometry.com/shoes/saucony-endorphin-pro-5"><img src="https://shoegeometry.com/shoes/saucony-endorphin-pro-5/share.png" alt="Saucony Endorphin Pro 5: running-shoe geometry (ShoeGeometry)" width="600" height="315" style="max-width:100%;height:auto"></a>

Live embed (updates when we measure more):

<iframe src="https://shoegeometry.com/embed/shoes/saucony-endorphin-pro-5" title="Saucony Endorphin Pro 5 (ShoeGeometry)" width="100%" height="440" style="border:0;max-width:640px" loading="lazy"></iframe> <p><a href="https://shoegeometry.com/shoes/saucony-endorphin-pro-5">Saucony Endorphin Pro 5</a>: running-shoe geometry from ShoeGeometry</p>

Free to use with the link back (CC BY 4.0). Lab measurements are credited to the lab that made them.

Sources

  • Cut in half: Saucony Endorphin Pro 5 Review (2026) | RunRepeatlabRunRepeataccessed 2026-11-14open ↗
  • Saucony Endorphin Pro 5 Review: Backseat Driver | Believe in the RunreviewBelieve in the Runaccessed 2026-10-02open ↗
  • saucony-endorphin-pro-5 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 sole product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-pro-5 sole product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • Men's Endorphin Pro 5 Plated Race Day Running Shoes by SauconymanufacturerSauconyaccessed 2026-10-02open ↗

Change history

What was recorded for this shoe, by day, newest first. A corrected or re-measured value shows what it replaced; earlier values stay in the technical detail below.

  1. 2026-10-28

    • Heel-to-toe drop: 8.7 mm, lab measurement, RunRepeat
    • Heel stack: 36.5 mm, lab measurement, RunRepeat
    • Forefoot stack: 27.8 mm, lab measurement, RunRepeat
  2. 2026-10-04

    • Photo estimates updated: heel bevel, toe box shape, from 8 photos (method 0.1, 0.3, 0.3-bc1)
  3. 2026-10-03

    • Midsole width (forefoot): 120.1 mm, lab measurement, RunRepeat
    • Midsole width (heel): 91.2 mm, lab measurement, RunRepeat
    • Interior forefoot width: 95.2 mm, lab measurement, RunRepeat
    • Toebox width: 69.3 mm, lab measurement, RunRepeat
    • Longitudinal stiffness: 96/100, derived, RunRepeat
    • Midsole firmness: 49/100, derived, RunRepeat
    • Photo estimates: toe rocker and toe tip, heel bevel, platform width, toe box shape, from 12 photos (method 0.1, 0.2, 0.3, 0.3-bc1)
  4. 2026-10-02

    • Heel-to-toe drop: 8 mm, brand figure, Believe in the Run
    • Heel stack: 39.5 mm, brand figure, Believe in the Run
    • Forefoot stack: 31.5 mm, brand figure, Believe in the Run
    • Weight: 232 g, brand figure, Believe in the Run
Technical detail: every recorded value, method and version (33)

All approved observations

Every recorded value, including superseded ones. The displayed value per metric is chosen by precedence (measured › stated › derived › AI estimated), then confidence, then recency. 115 further observations awaiting review.

MetricValueClassConfidenceMethodSourceRecorded
Heel-to-toe drop8.7 mmMeasuredMediumLab testRunRepeat2026-10-25
Heel-to-toe drop8 mmStatedHighSpec listingBelieve in the Run2026-10-02
Heel stack36.5 mmMeasuredMediumLab testRunRepeat2026-10-25
Heel stack39.5 mmStatedHighSpec listingBelieve in the Run2026-10-02
Forefoot stack27.8 mmMeasuredMediumLab testRunRepeat2026-10-25
Forefoot stack31.5 mmStatedHighSpec listingBelieve in the Run2026-10-02
Weight232 g (US M10.5)StatedHighChecked by handBelieve in the Run2026-10-02
Rocker apex63.5 %est.LowSide photoRunning Warehouse2026-10-03
Rocker apex63.4 %est.LowSide photoRunning Warehouse2026-10-03
Rocker radius40 %est.LowSide photoRunning Warehouse2026-10-03
Rocker radius41 %est.LowSide photoRunning Warehouse2026-10-03
Rocker rise angle32 degest.LowSide photoRunning Warehouse2026-10-03
Rocker rise angle32 degest.LowSide photoRunning Warehouse2026-10-03
Toe tip over ground46 mmest.LowSide photoRunning Warehouse2026-10-03
Toe tip over ground47 mmest.LowSide photoRunning Warehouse2026-10-03
Rocker angle at toe62 degest.LowSide photoRunning Warehouse2026-10-03
Rocker angle at toe62 degest.LowSide photoRunning Warehouse2026-10-03
Visible rocker lift onset76.4 %est.LowSide photoRunning Warehouse2026-10-03
Visible rocker lift onset76.2 %est.LowSide photoRunning Warehouse2026-10-03
Toe spring (relative)21.4 %est.LowSide photoRunning Warehouse2026-10-03
Toe spring (relative)21 %est.LowSide photoRunning Warehouse2026-10-03
Heel bevel length13 %est.MediumSide photoRunning Warehouse2026-10-04
Heel bevel length13.1 %est.LowSide photoRunning Warehouse2026-10-04
Heel bevel height31 mmest.LowSide photoRunning Warehouse2026-10-04
Heel bevel height31 mmest.MediumSide photoRunning Warehouse2026-10-04
Midsole width (forefoot)120.1 mmMeasuredMediumLab testRunRepeat2026-10-03
Midsole width (heel)91.2 mmMeasuredMediumLab testRunRepeat2026-10-03
Toe box shape74 %est.LowTop photoRunning Warehouse2026-10-03
Toe box shape74 %est.LowTop photoRunning Warehouse2026-10-03
Interior forefoot width95.2 mmMeasuredMediumLab testRunRepeat2026-10-03
Toebox width69.3 mmMeasuredMediumLab testRunRepeat2026-10-03
Longitudinal stiffness96 DerivedMediumLab flex testRunRepeat2026-10-03
Midsole firmness49 DerivedMediumLab durometerRunRepeat2026-10-03

Classes: Manufacturer stated · Externally measured · AI estimated · Derived · User reported. Hover a method for its identifier and algorithm version.

Source notes

  • Running Warehouse: sha256=c5ce04bf60388c26338940b946e353bed8bf9d0d9ae004a80bd96b4e52e31948; 0.3
  • Running Warehouse: sha256=55a3fc9b64a13f5e0c8a68f15af7a75a5d74adfa9fc490a3a4aa8732b4455353; 0.2
  • Running Warehouse: sha256=e2a201d59fdd76c7f12efe05fad927a06e3cfee9c7224f02fdde155fe084b553; 0.3
  • Running Warehouse: sha256=f882524b7880c5d22a6510316dc031a90eebcfc1393fd92b77661de39f6323e5; 0.2
  • Running Warehouse: sha256=76087addf80f78619899852734419bbc61098dc6ab27ba2bca630d6c4df77ecb; 0.3
  • Running Warehouse: sha256=96e9625837b48ba219f6d3de370feb74f9b9f49865361e04fae054436ebf624b; 0.3
  • Running Warehouse: sha256=fe78f13d9549020cc6f2b99fbd6bdba865bb6335c41de90a36a811849cc53aa3; 0.1
  • Running Warehouse: sha256=7a3349ef1c1c26b07f7074ea38f52be16500c93c580d1a1127257acf07ea5255; 0.1

Closest current models from other lines by stack, drop, rocker, toe height, stiffness, firmness, weight and width, whichever both shoes have.