ShoeGeometry

Saucony Endorphin Elite 3

RacingRoadCarbon plate2026Men'sCurrent

Last updated 2026-10-28 · methods as of 2026-10-08 · change history · why sources disagree

Top-tier carbon racer on IncrediRUN foam with SPEEDROLL geometry and an 8 mm drop.

Catalogue average: heel 38 mm, forefoot 31 mm, toe rocker 35 %Saucony Endorphin Elite 3: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 31 % of length, radius 33 % of length; heel bevel 12 % of length, 26 mm high at the back, ending about under the heel bone.40 mm32 mmUnder the centre of the heel bone: 12 % of length from the heel, where heel stack is measuredheel boneHeel contact: the sole is within 4.5 mm of the ground from 12 % of length (foam compresses more under load), ending about under the heel boneheel bevel 12 %Toe rocker: the front 31 % of the length curves up (the curve leaves the ground 69 % of length from the heel)toe rocker 31 %toeheel
Front: toe rocker shorter longerRear: heel stack lower higher not measured
Dashed: average of the catalogue
Illustrative profile, not a photograph or scan: drawn to scale for a 300 mm shoe from published stack heights and photo estimates of the unloaded shoe (under body weight the foam compresses and the curves flatten). The grey upper is a generic outline, not this shoe’s. Saucony Endorphin Elite 3: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 31 % of length, radius 33 % of length; heel bevel 12 % of length, 26 mm high at the back, ending about under the heel bone. Heel bone: 12 % of length from the heel, where heel stack is measured. Heel bevel and toe rocker are marked where each curve meets the ground; for the heel that is where the sole comes within 4.5 mm of the ground, which foam compression closes under body weight.

Estimated by ShoeGeometry from photos

AI estimated
Toe rocker
31%median of 6 photos
Toe tip over ground
44mmmedian of 6 photos, approx., for a men’s US 9
Heel bevel length
12.1%from 6 photos, rough estimate
Rocker radius
33 %from 6 photos
Rocker rise angle
35 degmedian of 6 photos
Rocker angle at toe
63 degfrom 6 photos
Visible rocker lift onset
78 %from 6 photos
Toe spring (relative)
21.8 %median of 6 photos
Heel bevel height
26 mm*median of 6 photos, approx., for a men’s US 9
Toe box shape
80 %*from 5 photos

* Uncertain: the photos disagree more than usual.

ShoeGeometry’s own software estimates these from public side-profile photos of the shoe (the toe box from top and sole views), not from brand or lab figures; each combines several photos, the toe measures and heel height as their median (how). We compared them with one independent lab’s rocker measurements of about 110 shoes (how close they come).

At a glance

Figures from brands, labs and retailers, each credited below.

Heel-to-toe drop
8mmStated
Stack, heel / forefoot
39.5 / 31.5mmStated
Weight
207gStatedUS M9
Stiffness / firmness
54 / 0of 100Derived
Plate
Carbon plate
Primary foam
IncrediRUN

How it compares

  • Saucony Endorphin Elite 3's heel-to-toe drop is 8 mm, higher than the catalogue median of 6 mm (62% of the 209 other current shoes are lower).
  • Saucony Endorphin Elite 3's heel stack is 39.5 mm, thicker than the catalogue median of 38 mm (63% of the 208 other current shoes are thinner).
  • Saucony Endorphin Elite 3's forefoot stack is 31.5 mm, about the catalogue median of 31 mm (53% of the 206 other current shoes are thinner).
  • Saucony Endorphin Elite 3's weight is 207 g, lighter than the catalogue median of 268 g (9% of the 197 other current shoes are lighter).
  • Against the Saucony Endorphin Elite 2: weight heavier (details).
  • 4 shoes with similar geometry from other lines.

Differences smaller than the precision of the sources (about 1 mm of stack, 8 g, or the spread between photos for photo estimates) are reported as about the same.

Specifications

Heel-to-toe drop
Manufacturer stated
8mm
HighChecked by handbrand figure, reported by Believe in the Runsource
Heel stack
Manufacturer stated
39.5mm
HighSpec listingbrand figure, reported by Believe in the Runsource
Forefoot stack
Manufacturer stated
31.5mm
HighSpec listingbrand figure, reported by Believe in the Runsource
Weight
Manufacturer stated
207g
HighChecked by handbrand figure, reported by Believe in the RunUS M9source

Measured in a lab (RunRepeat): heel 39.8 mm · forefoot 34.1 mm · drop 5.7 mm, taken at the points World Athletics uses (12 % and 75 % of the length), the same on every shoe. The figures above are the brand’s where it states them; labs and brands often measure at different points (why sources disagree).

Plate
Carbon plateRedesigned carbon fibre plate
Primary foam
IncrediRUN
List price
$290

Plate, foam and price from Endorphin Elite 3 Elite Plated Race Day Shoes by Saucony.

Geometry

Percent values are relative to shoe length so they compare across images and sizes; widths in millimetres are lab measurements from the cited source, while toe tip and heel heights in millimetres are photo estimates converted for a men’s US 9 (assumed 300 mm long), so approximate. See how rocker geometry is defined.

Toe rocker
AI estimated
31%

Median of 6 photos.

LowSide photosource
Rocker radius
AI estimated
33%

From 6 photos: one of the two that agree most closely.

LowSide photosource
Rocker rise angle
AI estimated
35deg

Median of 6 photos.

LowSide photosource
Toe tip over ground
AI estimated
44mm

Median of 6 photos.

MediumSide photosource
Rocker angle at toe
AI estimated
63deg

From 6 photos: one of the two that agree most closely.

LowSide photosource
Visible rocker lift onset
AI estimated
78%

From 6 photos: one of the two that agree most closely.

LowSide photosource
Toe spring (relative)
AI estimated
21.8%

Median of 6 photos.

MediumSide photosource
Heel bevel length
AI estimated
12.1%

From 6 photos: the average of the two that agree most closely.

LowSide photosource
Heel bevel height
AI estimated
26mm*

Median of 6 photos. * Uncertain: the photos disagree more than usual.

MediumSide photosource
Midsole width (forefoot)
Externally measured
116.2mm
MediumLab testsource
Midsole width (heel)
Externally measured
94.2mm
MediumLab testsource
Toe box shape
AI estimated
80%*

From 5 photos: the average of the two that agree most closely. * Uncertain: the photos disagree more than usual.

LowTop photosource
Interior forefoot width
Externally measured
93.8mm
MediumLab testsource
Toebox width
Externally measured
71.8mm
MediumLab testsource

Stiffness

Longitudinal stiffness
Derived
54/ 100

Lab reading: 18.2 N, force to bend the shoe 30° (lab bending test); the score is our 0–100 rescaling of it.

MediumLab flex testsource
Midsole firmness
Derived
0/ 100

Lab reading: 15.5 Asker C, midsole durometer reading (higher = firmer); the score is our 0–100 rescaling of it.

MediumLab durometersource

How it compares

Appears in:Carbon plateLightweight

Compare:Saucony Endorphin Elite 3 vs Saucony Endorphin Elite 2Saucony Endorphin Elite 3 vs ASICS Metaspeed Sky TokyoSaucony Endorphin Elite 3 vs Hoka Cielo X1 3.0Saucony Endorphin Elite 3 vs ASICS Metaspeed RaySaucony Endorphin Elite 3 vs Puma Deviate Nitro Elite 4Saucony Endorphin Elite 3 vs ASICS Metaspeed Edge TokyoSaucony Endorphin Elite 3 vs Adidas Adizero Adios Pro 5Saucony Endorphin Elite 3 vs Norda 005Previous version: Saucony Endorphin Elite 2

What changed from the Saucony Endorphin Elite 2

Weight heavier. Compared with the previous version in this catalogue; differences within measurement noise are shown as about the same.

heel boneSaucony Endorphin Elite 3: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 31 % of length, radius 33 % of length; heel bevel 12 % of length, 26 mm high at the back, ending about under the heel bone.Saucony Endorphin Elite 3: toe rocker 31 % of lengthSaucony Endorphin Elite 2: heel 40 mm, forefoot 32 mm (drop 8 mm); toe rocker 33 % of length, radius 36 % of length; heel bevel 10 % of length, 26 mm high at the back, ending about under the heel bone.Saucony Endorphin Elite 2: toe rocker 33 % of length
  • Saucony Endorphin Elite 340/32 mm · toe rocker 31 % · heel bevel 12 %
  • Saucony Endorphin Elite 240/32 mm · toe rocker 33 % · heel bevel 10 %
Illustrative profiles, not photographs: drawn from published stack heights and photo estimates of the unloaded shoes on a common length (300 mm), heels aligned, toe to the left; dots mark where each toe rocker starts; the dotted vertical line is under the heel bone (12 % of length), so a heel curve reaching past it is a bevel in front of the heel bone. Dotted lines use typical values where a shoe has no measurement. Exact values are in the table below.
MeasureSaucony Endorphin Elite 2Saucony Endorphin Elite 3Change
Heel stack39.5 mm39.5 mmabout the same
Forefoot stack31.5 mm31.5 mmabout the same
Drop8 mm8 mmabout the same
Weight199 g207 gheavier (+8 g)
Toe rocker32.6% of length31% of lengthabout the same
Toe tip over ground48.5 mm44.3 mmabout the same
Rocker rise angle34.8°34.7°about the same
Stiffness50/10054/100about the same
Firmness6/1000/100about the same
Forefoot base width116.2 mm116.2 mmabout the same

Full side-by-side comparison →

Wrong value? Missing data? Tell me
Stored only to improve the site; see privacy.

Read more about this shoe

We measure the shape. For how the Saucony Endorphin Elite 3 feels over many miles, and for lab tests of cushioning, grip and fit, read these:

Independent sites; we are not affiliated with them. Found automatically each week.

Share or embed

Saucony Endorphin Elite 3: side profile drawing and key numbers
Download image

Embed on your site, blog or forum

Image with a link back:

<a href="https://shoegeometry.com/shoes/saucony-endorphin-elite-3"><img src="https://shoegeometry.com/shoes/saucony-endorphin-elite-3/share.png" alt="Saucony Endorphin Elite 3: running-shoe geometry (ShoeGeometry)" width="600" height="315" style="max-width:100%;height:auto"></a>

Live embed (updates when we measure more):

<iframe src="https://shoegeometry.com/embed/shoes/saucony-endorphin-elite-3" title="Saucony Endorphin Elite 3 (ShoeGeometry)" width="100%" height="440" style="border:0;max-width:640px" loading="lazy"></iframe> <p><a href="https://shoegeometry.com/shoes/saucony-endorphin-elite-3">Saucony Endorphin Elite 3</a>: running-shoe geometry from ShoeGeometry</p>

Free to use with the link back (CC BY 4.0). Lab measurements are credited to the lab that made them.

Sources

  • Cut in half: Saucony Endorphin Elite 3 Review (2026) | RunRepeatlabRunRepeataccessed 2026-11-14open ↗
  • Saucony's Endorphin Elite 3 is our Bouncy Dark Horse for Fast Days | Believe in the RunreviewBelieve in the Runaccessed 2026-10-02open ↗
  • saucony-endorphin-elite-3 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 medial product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 lateral product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 top product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • saucony-endorphin-elite-3 top product photoimageRunning Warehouseaccessed 2026-10-03open ↗
  • Endorphin Elite 3 Elite Plated Race Day Shoes by SauconymanufacturerSauconyaccessed 2026-10-02open ↗

Change history

What was recorded for this shoe, by day, newest first. A corrected or re-measured value shows what it replaced; earlier values stay in the technical detail below.

  1. 2026-10-28

    • Heel-to-toe drop: 5.7 mm, lab measurement, RunRepeat
    • Heel stack: 39.8 mm, lab measurement, RunRepeat
    • Forefoot stack: 34.1 mm, lab measurement, RunRepeat
  2. 2026-10-04

    • Photo estimates updated: heel bevel, toe box shape, from 8 photos (method 0.1, 0.3, 0.3-bc1)
  3. 2026-10-03

    • Midsole width (forefoot): 116.2 mm, lab measurement, RunRepeat
    • Midsole width (heel): 94.2 mm, lab measurement, RunRepeat
    • Interior forefoot width: 93.8 mm, lab measurement, RunRepeat
    • Toebox width: 71.8 mm, lab measurement, RunRepeat
    • Longitudinal stiffness: 54/100, derived, RunRepeat
    • Midsole firmness: 0/100, derived, RunRepeat
    • Photo estimates: toe rocker and toe tip, heel bevel, platform width, toe box shape, from 12 photos (method 0.1, 0.2, 0.3, 0.3-bc1)
  4. 2026-10-02

    • Heel stack: 39.5 mm, brand figure, Believe in the Run
    • Forefoot stack: 31.5 mm, brand figure, Believe in the Run
    • Heel-to-toe drop: 8 mm, brand figure, Believe in the Run
    • Weight: 207 g, brand figure, Believe in the Run
Technical detail: every recorded value, method and version (33)

All approved observations

Every recorded value, including superseded ones. The displayed value per metric is chosen by precedence (measured › stated › derived › AI estimated), then confidence, then recency. 99 further observations awaiting review.

MetricValueClassConfidenceMethodSourceRecorded
Heel-to-toe drop5.7 mmMeasuredMediumLab testRunRepeat2026-10-25
Heel-to-toe drop8 mmStatedHighChecked by handBelieve in the Run2026-10-02
Heel stack39.8 mmMeasuredMediumLab testRunRepeat2026-10-25
Heel stack39.5 mmStatedHighSpec listingBelieve in the Run2026-10-02
Forefoot stack34.1 mmMeasuredMediumLab testRunRepeat2026-10-25
Forefoot stack31.5 mmStatedHighSpec listingBelieve in the Run2026-10-02
Weight207 g (US M9)StatedHighChecked by handBelieve in the Run2026-10-02
Rocker apex69.4 %est.LowSide photoRunning Warehouse2026-10-03
Rocker apex69.3 %est.LowSide photoRunning Warehouse2026-10-03
Rocker radius33 %est.LowSide photoRunning Warehouse2026-10-03
Rocker radius33 %est.LowSide photoRunning Warehouse2026-10-03
Rocker rise angle35 degest.LowSide photoRunning Warehouse2026-10-03
Rocker rise angle36 degest.LowSide photoRunning Warehouse2026-10-03
Toe tip over ground44 mmest.LowSide photoRunning Warehouse2026-10-03
Toe tip over ground44 mmest.MediumSide photoRunning Warehouse2026-10-03
Rocker angle at toe63 degest.LowSide photoRunning Warehouse2026-10-03
Rocker angle at toe63 degest.LowSide photoRunning Warehouse2026-10-03
Visible rocker lift onset78.1 %est.LowSide photoRunning Warehouse2026-10-03
Visible rocker lift onset78 %est.LowSide photoRunning Warehouse2026-10-03
Toe spring (relative)21.4 %est.LowSide photoRunning Warehouse2026-10-03
Toe spring (relative)21.6 %est.MediumSide photoRunning Warehouse2026-10-03
Heel bevel length12 %est.LowSide photoRunning Warehouse2026-10-04
Heel bevel length12.3 %est.LowSide photoRunning Warehouse2026-10-04
Heel bevel height23 mmest.LowSide photoRunning Warehouse2026-10-04
Heel bevel height23 mmest.MediumSide photoRunning Warehouse2026-10-04
Midsole width (forefoot)116.2 mmMeasuredMediumLab testRunRepeat2026-10-03
Midsole width (heel)94.2 mmMeasuredMediumLab testRunRepeat2026-10-03
Toe box shape80 %est.LowTop photoRunning Warehouse2026-10-03
Toe box shape81 %est.LowTop photoRunning Warehouse2026-10-03
Interior forefoot width93.8 mmMeasuredMediumLab testRunRepeat2026-10-03
Toebox width71.8 mmMeasuredMediumLab testRunRepeat2026-10-03
Longitudinal stiffness54 DerivedMediumLab flex testRunRepeat2026-10-03
Midsole firmness0 DerivedMediumLab durometerRunRepeat2026-10-03

Classes: Manufacturer stated · Externally measured · AI estimated · Derived · User reported. Hover a method for its identifier and algorithm version.

Source notes

  • Running Warehouse: sha256=7a19812318883dfb798e1dac83b6fb98c1e531d8af43fa246a645b7a3b3ca950; 0.3
  • Running Warehouse: sha256=d1d9abfbc3d4b5a8fd441b34d59a8c566f9e65c3bef70e6b8f46a683e1ca2784; 0.3
  • Running Warehouse: sha256=136e6a56f360754d57f655bed7a4329acdf7f8a73d45709943db60f512ba6175; 0.2
  • Running Warehouse: sha256=d938b08ce94e54de6638725a1951ff152002a5ffbb8f8d72915ed98ef50a76c4; 0.3
  • Running Warehouse: sha256=6dcc35dce703da25284dc53843b03d05427126285d030fd16a2dc5e3c509e5cb; 0.2
  • Running Warehouse: sha256=119acfeb255c67d39d1c4a99994abec242da203d6ddc1983c2dd4d77b5d9f466; 0.3
  • Running Warehouse: sha256=c4a7752acc43437f308e8bf82e6f504f0bdbb4bab25f917987b044b93fb54f25; 0.1
  • Running Warehouse: sha256=557e47dffbbc38fc218b4f8232210f1339c5c5d3d05f1e4352fb6e2e76148594; 0.1

Closest current models from other lines by stack, drop, rocker, toe height, stiffness, firmness, weight and width, whichever both shoes have.